This is the simple KGDB over Ethernet I/O driver that uses netpoll for all of the heavy lifting. At one point this was very similar to the version Matt Mackall wrote and is currently in Andrew's tree. Since then it has been reworked to fit into our model. Signed-off-by: Tom Rini drivers/net/Makefile | 1 drivers/net/kgdboe.c | 294 +++++++++++++++++++++++++++++++++++++++++++++++++++ lib/Kconfig.debug | 24 ++++ 3 files changed, 319 insertions(+) Index: linux-2.6.19-rc4/drivers/net/kgdboe.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.19-rc4/drivers/net/kgdboe.c 2006-11-01 22:21:11.000000000 +0000 @@ -0,0 +1,294 @@ +/* + * drivers/net/kgdboe.c + * + * A network interface for GDB. + * Based upon 'gdbserial' by David Grothe + * and Scott Foehner + * + * Maintainers: Amit S. Kale and + * Tom Rini + * + * 2004 (c) Amit S. Kale + * 2004-2005 (c) MontaVista Software, Inc. + * 2005 (c) Wind River Systems, Inc. + * + * Contributors at various stages not listed above: + * San Mehat , Robert Walsh , + * wangdi , Matt Mackall , + * Pavel Machek , Jason Wessel + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#define IN_BUF_SIZE 512 /* power of 2, please */ +#define NOT_CONFIGURED_STRING "not_configured" +#define OUT_BUF_SIZE 30 /* We don't want to send too big of a packet. */ +#define MAX_KGDBOE_CONFIG_STR 256 + +static char in_buf[IN_BUF_SIZE], out_buf[OUT_BUF_SIZE]; +static int in_head, in_tail, out_count; +static atomic_t in_count; +/* 0 = unconfigured, 1 = netpoll options parsed, 2 = fully configured. */ +static int configured; +static struct kgdb_io local_kgdb_io_ops; +static int use_dynamic_mac; + +MODULE_DESCRIPTION("KGDB driver for network interfaces"); +MODULE_LICENSE("GPL"); +static char config[MAX_KGDBOE_CONFIG_STR] = NOT_CONFIGURED_STRING; +static struct kparam_string kps = { + .string = config, + .maxlen = MAX_KGDBOE_CONFIG_STR, +}; + +static void rx_hook(struct netpoll *np, int port, char *msg, int len, + struct sk_buff *skb) +{ + int i; + + np->remote_port = port; + + /* Copy the MAC address if we need to. */ + if (use_dynamic_mac) { + memcpy(np->remote_mac, eth_hdr(skb)->h_source, + sizeof(np->remote_mac)); + use_dynamic_mac = 0; + } + + /* + * This could be GDB trying to attach. But it could also be GDB + * finishing up a session, with kgdb_connected=0 but GDB sending + * an ACK for the final packet. To make sure we don't try and + * make a breakpoint when GDB is leaving, make sure that if + * !kgdb_connected the only len == 1 packet we allow is ^C. + */ + if (!kgdb_connected && (len != 1 || msg[0] == 3) && + !atomic_read(&kgdb_setting_breakpoint)) { + tasklet_schedule(&kgdb_tasklet_breakpoint); + } + + for (i = 0; i < len; i++) { + if (msg[i] == 3) + tasklet_schedule(&kgdb_tasklet_breakpoint); + + if (atomic_read(&in_count) >= IN_BUF_SIZE) { + /* buffer overflow, clear it */ + in_head = in_tail = 0; + atomic_set(&in_count, 0); + break; + } + in_buf[in_head++] = msg[i]; + in_head &= (IN_BUF_SIZE - 1); + atomic_inc(&in_count); + } +} + +static struct netpoll np = { + .dev_name = "eth0", + .name = "kgdboe", + .rx_hook = rx_hook, + .local_port = 6443, + .remote_port = 6442, + .remote_mac = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, +}; + +static void eth_pre_exception_handler(void) +{ + /* Increment the module count when the debugger is active */ + if (!kgdb_connected) + try_module_get(THIS_MODULE); + netpoll_set_trap(1); +} + +static void eth_post_exception_handler(void) +{ + /* decrement the module count when the debugger detaches */ + if (!kgdb_connected) + module_put(THIS_MODULE); + netpoll_set_trap(0); +} + +static int eth_get_char(void) +{ + int chr; + + while (atomic_read(&in_count) == 0) + netpoll_poll(&np); + + chr = in_buf[in_tail++]; + in_tail &= (IN_BUF_SIZE - 1); + atomic_dec(&in_count); + return chr; +} + +static void eth_flush_buf(void) +{ + if (out_count && np.dev) { + netpoll_send_udp(&np, out_buf, out_count); + memset(out_buf, 0, sizeof(out_buf)); + out_count = 0; + } +} + +static void eth_put_char(u8 chr) +{ + out_buf[out_count++] = chr; + if (out_count == OUT_BUF_SIZE) + eth_flush_buf(); +} + +static int option_setup(char *opt) +{ + char opt_scratch[MAX_KGDBOE_CONFIG_STR]; + + /* If we're being given a new configuration, copy it in. */ + if (opt != config) + strcpy(config, opt); + /* But work on a copy as netpoll_parse_options will eat it. */ + strcpy(opt_scratch, opt); + configured = !netpoll_parse_options(&np, opt_scratch); + + use_dynamic_mac = 1; + + return 0; +} +__setup("kgdboe=", option_setup); + +/* With our config string set by some means, configure kgdboe. */ +static int configure_kgdboe(void) +{ + /* Try out the string. */ + option_setup(config); + + if (!configured) { + printk(KERN_ERR "kgdboe: configuration incorrect - kgdboe not " + "loaded.\n"); + printk(KERN_ERR " Usage: kgdboe=[src-port]@[src-ip]/[dev]," + "[tgt-port]@/\n"); + return -EINVAL; + } + + /* Bring it up. */ + if (netpoll_setup(&np)) { + printk(KERN_ERR "kgdboe: netpoll_setup failed kgdboe failed\n"); + return -EINVAL; + } + + if (kgdb_register_io_module(&local_kgdb_io_ops)) { + netpoll_cleanup(&np); + return -EINVAL; + } + + configured = 2; + + return 0; +} + +static int init_kgdboe(void) +{ + int ret; + + /* Already done? */ + if (configured == 2) + return 0; + + /* OK, go ahead and do it. */ + ret = configure_kgdboe(); + + if (configured == 2) + printk(KERN_INFO "kgdboe: debugging over ethernet enabled\n"); + + return ret; +} + +static void cleanup_kgdboe(void) +{ + netpoll_cleanup(&np); + configured = 0; + kgdb_unregister_io_module(&local_kgdb_io_ops); +} + +static int param_set_kgdboe_var(const char *kmessage, struct kernel_param *kp) +{ + char kmessage_save[MAX_KGDBOE_CONFIG_STR]; + int msg_len = strlen(kmessage); + + if (msg_len + 1 > MAX_KGDBOE_CONFIG_STR) { + printk(KERN_ERR "%s: string doesn't fit in %u chars.\n", + kp->name, MAX_KGDBOE_CONFIG_STR - 1); + return -ENOSPC; + } + + if (kgdb_connected) { + printk(KERN_ERR "kgdboe: Cannot reconfigure while KGDB is " + "connected.\n"); + return 0; + } + + /* Start the reconfiguration process by saving the old string */ + strncpy(kmessage_save, config, sizeof(kmessage_save)); + + + /* Copy in the new param and strip out invalid characters so we + * can optionally specify the MAC. + */ + strncpy(config, kmessage, sizeof(config)); + msg_len--; + while (msg_len > 0 && + (config[msg_len] < ',' || config[msg_len] > 'f')) { + config[msg_len] = '\0'; + msg_len--; + } + + /* Check to see if we are unconfiguring the io module and that it + * was in a fully configured state, as this is the only time that + * netpoll_cleanup should get called + */ + if (configured == 2 && strcmp(config, NOT_CONFIGURED_STRING) == 0) { + printk(KERN_INFO "kgdboe: reverting to unconfigured state\n"); + cleanup_kgdboe(); + return 0; + } else + /* Go and configure with the new params. */ + configure_kgdboe(); + + if (configured == 2) + return 0; + + /* If the new string was invalid, revert to the previous state, which + * is at a minimum not_configured. */ + strncpy(config, kmessage_save, sizeof(config)); + if (strcmp(kmessage_save, NOT_CONFIGURED_STRING) != 0) { + printk(KERN_INFO "kgdboe: reverting to prior configuration\n"); + /* revert back to the original config */ + strncpy(config, kmessage_save, sizeof(config)); + configure_kgdboe(); + } + return 0; +} + +static struct kgdb_io local_kgdb_io_ops = { + .read_char = eth_get_char, + .write_char = eth_put_char, + .init = init_kgdboe, + .flush = eth_flush_buf, + .pre_exception = eth_pre_exception_handler, + .post_exception = eth_post_exception_handler +}; + +module_init(init_kgdboe); +module_exit(cleanup_kgdboe); +module_param_call(kgdboe, param_set_kgdboe_var, param_get_string, &kps, 0644); +MODULE_PARM_DESC(kgdboe, " kgdboe=[src-port]@[src-ip]/[dev]," + "[tgt-port]@/\n"); Index: linux-2.6.19-rc4/drivers/net/Makefile =================================================================== --- linux-2.6.19-rc4.orig/drivers/net/Makefile 2006-11-01 21:37:51.000000000 +0000 +++ linux-2.6.19-rc4/drivers/net/Makefile 2006-11-01 22:21:11.000000000 +0000 @@ -211,6 +211,7 @@ obj-$(CONFIG_ETRAX_ETHERNET) += cris/ obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/ obj-$(CONFIG_NETCONSOLE) += netconsole.o +obj-$(CONFIG_KGDBOE) += kgdboe.o obj-$(CONFIG_FS_ENET) += fs_enet/ Index: linux-2.6.19-rc4/lib/Kconfig.debug =================================================================== --- linux-2.6.19-rc4.orig/lib/Kconfig.debug 2006-11-01 22:21:05.000000000 +0000 +++ linux-2.6.19-rc4/lib/Kconfig.debug 2006-11-01 22:21:11.000000000 +0000 @@ -472,8 +472,32 @@ config KGDB_8250_NOMODULE Uses generic serial port (8250) to communicate with the host GDB. This is independent of the normal (SERIAL_8250) driver for this chipset. + +config KGDBOE_NOMODULE + bool "KGDB: On ethernet - in kernel" + select KGDBOE + select NETPOLL + select NETPOLL_TRAP + select NETPOLL_RX + help + Uses the NETPOLL API to communicate with the host GDB via UDP. + In order for this to work, the ethernet interface specified must + support the NETPOLL API, and this must be initialized at boot. + See the documentation for syntax. endchoice +config KGDBOE + tristate "KGDB: On ethernet" if !KGDBOE_NOMODULE + depends on m && KGDB + select NETPOLL + select NETPOLL_TRAP + select NETPOLL_RX + help + Uses the NETPOLL API to communicate with the host GDB via UDP. + In order for this to work, the ethernet interface specified must + support the NETPOLL API, and this must be initialized at boot. + See the documentation for syntax. + config KGDB_8250 tristate "KGDB: On generic serial port (8250)" if !KGDB_8250_NOMODULE depends on m && KGDB_ONLY_MODULES